In surface treatment and coating facilities, oils or various process chemicals may be spilled into the work area during chemical preparation, surface cleaning, maintenance, lubrication and production activities. Such spills require a controlled response in accordance with work area management and operating procedures. The primary objective of the response is to contain the spilled liquid and remove it from the surface using an appropriate method.
The absorbent material used for spill control should be selected according to the chemical characteristics of the liquid. Oil absorbents may be used for oils and oil-based liquids, while suitable chemical absorbents should be selected for process chemicals with different properties. For certain oily spills, organic absorbent materials may also be used depending on surface conditions and the volume of the spill.
During spill response, the source of the spill should first be brought under control safely whenever possible. The spread of the liquid to surrounding areas or other parts of the facility should then be contained, and a suitable absorbent material applied to the spill. Once the absorbent becomes saturated, it should be collected and removed from the surface.
Contaminated absorbent materials should be handled in accordance with appropriate waste management procedures based on the properties of the liquids they have absorbed. Spill control should therefore be regarded not merely as surface cleaning, but as an integrated operational practice encompassing response, containment, collection and waste management.
Product ınformatıon
- Oil-Absorbent Roll Pad, Chemical-Absorbent Roll Pad, Organic Oil-Absorbent Granular Material
