POR Reactive Hot Melt
Silane-reactive polyolefin hot melt with high heat resistance and no hazard labelling.
POR hot melts use silane as the reactive group, so they contain no isocyanate and need no hazard labelling. After moisture curing they offer far higher heat resistance than conventional thermoplastic PO adhesives. A health-and-safety-friendly alternative for edge banding and automotive interior lamination.
Technical data
| Chemical base | POR |
|---|---|
| System | Solvent-free (100% solids) |
| Curing | Moisture curing |
| Application temperature | 140 – 180 °C |
| Open time | Orta |
| Viscosity | Orta |
| Heat resistance | Very high |
| Packaging options | Cartridges, Pails, Drums |
| Brands | Sentatherm-Reaktant · Jowatherm-Reaktant |
Values show typical ranges; contact us for the series data sheet.
Advantages
- Isocyanate-free, no labelling
- Far higher heat resistance than PO
- Good adhesion to difficult plastics
Property
Industries
Related articles
Successful profile wrapping: adhesive, primer and process settings
Common problems when wrapping films and veneers around MDF, PVC and aluminium profiles, and the right adhesive–primer combination.
Flat lamination: bonding HPL, CPL and veneers
Choosing the right adhesive, coat weight and press parameters for cold press, hot press and roller lamination.
Adhesives in door and window production
From interior doors to PVC window profiles: which adhesive is used for profile wrapping, frame joining and surface lamination, and why.
Tell us about your application and let's make the right bond together
Our technical team supports you from product selection to line trials. We reply to sample and quote requests within one working day.